Process OPR Controller / Transmitter

Process OPR Controller / Transmitter

Temperature Gauge

Temperature gauges measure the thermal state of a homogeneous substance. The measuring system must be brought as closely together as possible with the body to be measured. The most widely used measuring methods for temperature measurement rely on temperature-dependent characteristics of the body and substance.

Hydraulic Portable Hand Pump

Hydraulic hand pump is a kind of small high pressure hydraulic pump that can transfer the mechanical power to the hydraulic power, matched with the hydraulic cylinder for lifting the heavy equipment, and also can be matched with the other hydraulic tools for bending, cutting,...

Hydraulic Comparison Tester

Hydraulic Comparison Test Pump is a simple, robust and economical pressure comparator for calibrating gauges, switches and transducers with accurate, fine adjust capabilities. It generates pressure to 10 000 psi (70 MPa), with a new Vernier that enables cardinal point calibrations.we can be mounted easily...

5 Valve Manifolds

A Manifold that concentrates in a single block the functions of isolation, equalize and vent are designed to allow both direct and remote mounting.2 isolations valves, 1 equalizing valve & 2 drain / calibration valves.

3 Valve Manifolds

3 valve manifolds concentrate the functions of isolation and equalizing in a single block, and are used with differential pressure transmitters, pressure gauges & pressure switches.2 isolation valves & 1 equalizing valve.

2 Valve Manifolds

2 valve manifolds are used with pressure gauges, switches or transmitters. 2 valves in 1 body, 1 is the isolation valve, the other the drain/calibration valve. For either direct or remote mounting

Gauge Siphons

All boilers are required to be fitted with a local pressure gauge that is easy to access and read. Additional remote gauges or read-outs are also recommended -and sometimes required- to monitor the pressure within the boiler. A boiler local pressure steam gauge should be:

Gauge Saver

Designed To Protect Pressure Equipment From Over Pressure Exciding The Specified Pressure Range By Sudden. This Device Blocks The Higher Pressure exceeding The Allowed Value Until It Comes Back To Normal, When Pressure Become Normal. Hence This Device Safe Guard The Pressure Equipments Gauges, Switches...

Gauge Cock

Quality Industries is an Indian valve manufacturing company that is rapidly expanding. Our extensive range of valves is specifically designed to control the flows like water, gas, steam, air, and oil etc… We have risen to the top of the valve industry thanks to a...

Needle Valve / Bleed Valve

Combines isolating and venting in a single valve, eliminating the need for tubing and fittings. Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation. The 1/4″ NPT vent plug...

Scrubber

Sight Glass

Body material:Stainless Steel 304. In-line sight glass flow pipe OD:38mm. Ferrule OD:50.5mm, Fits to 1.5″ tri clamp. Max pressure:120 PSI. Max temperature: 300°F. Sight glass flow indicators provides a full 360 degree to observe fluid flow in any direction. Sanitary sight glasses are designed for...

Rotameter

Rota Meter – Flow Meters is a device used for measuring the volumetric flow of fluids such as water. It measures the rate of flow by varying the cross sectional area through which fluids flow and through this process cause a measuring effect. It’s made...

Level Indicator

Tubular Level Indicator (Side Mounted) with Tie Rod design, with Scale OR without Scale, with OR without inbuilt Valves. It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for...

Turbine Type Flow Meter

The operation of the international Turbine Flow Meter is based on the measurement of the pace of oil, heavy oil, furnace oil, water, and non-acidic beverages. We offer high performance, high accuracy turbine flow meter for all applications. The rotating turbine wheel drives the index...

Electro Magnetic Flow Meter

We are among the reputed organizations, highly engaged in providing a premium quality range of Electromagnetic Flow Meter. Our offered meter is widely acknowledged among our clients owing to its high accuracy and long life. The provided meter is precisely manufactured using the quality grade raw...

Thermo Hygro Meter

A thermo hygrometer is designed to be able to measure both air temperature and humidity. The temperature is typically measured with a digital thermometer. There may be a sensor attached to the device itself or it may have an additional sensor that can be placed in...

Digital Temperature Indicator / Controller

A Temperature Controller is a device that is used to control a heater or other equipment by comparing a sensor signal with a set point and performing calculations according to the deviation between those values.

RTD Sensor / Thermocouple

thermocouple, a temperature-measuring device consisting of two wires of different metals joined at each end. One junction is placed where the temperature is to be measured, and the other is kept at a constant lower temperature.

Temperature Transmitter

Glasschem Trading a range of Temperature Transmitters like DIN Rail, Head Mounted, RH+T Transmitter and Temperature Transmitters for HVAC. Transmitters convert low-level input signals from field sensors into a proportional 4~20 mA output that is ideal for driving other control instrumentation.

Temperature Switch

This temperature switch mainly includes a power supply source, measuring element, and electronic circuit. This switch is used to measure temperature by changing it into a switching signal through the change in temperature of the measuring element. This switching signal changes in proportion to the...

Pressure Transmitter

pressure transmitters, the measured values can be transmitted to the most varied production and monitoring systems, using a standardized output signal and thus can be monitored centrally. In addition, pressure measurement devices with a visible and clear measuring scale are still very popular, particularly in...

Pressure Switch

Pressure switches are a simple and effective way to avoid this danger. The pressure switches operate according to different measuring principles and can thus easily be adapted to the medium and the required pressure range. If a previously set pressure level is reached, an action...

Digital Pressure Gauge

Simple 2 button operation ,Re-Zero feature & peak pressure reading , Backlight turns on when on/off button is pressed and with pressure changes, 316L welded diaphragm seal , Rubber boot is standard ,Ideal for Commercial and Industrial applications in both test Measurement and General Purpose...

Pressure Gauge

This gauge has high corrosive resistance and inner chemical capability. This is built to be proper for corrosive atmosphere. Diameter : 100, 150mm ,Accuracy : 100, 150mm : ±1.0% of Full Scale, Working Pressure ,Static pressure : 75% of Full Scale,F luctuating pressure : 60%...

Digital TDS-Conductivity Meter - Auto Ranging

Water quality may be quickly assessed and total dissolved solids in water can be estimated using an electrical conductivity or total dissolved solids meter. NDSU Extension Livestock Environmental Stewardship Specialist Miranda Meehan; Agricultural Engineer Tom Scherer.

Digital PH meter - 3 Point Calibration

An equipment called a pH meter is used to measure the hydrogen ion activity in solutions, or the acidity or alkalinity of a solution. The pH level, which typically runs from 1 to 14, is the final expression of the degree of hydrogen ion activity.